This can be done by turning the cylinder over so the valve is on the bottom, or forcing the product through a dip tube to the valve. Manifold and hoses must be able to accommodate the higher-pressure range of R-410a The evaporator or indoor coil should be This gas is poised to replace the other gaseous such as R-410A. Make sure the system runs a good long while after you are done charging.Scroll compressors should never be used to evacuate a system, allowed to run in a vacuum or the have the suction service valve closed to check how low the. Allow the charge to stabilize every so often. Just be CAREFUL not to flood the compressor. Failure to meet this requirement can result in damage to equipment, release of refrigerant into the environment, contamination of the operating space for the equipment and pose a risk of personal injury or death.You can charge carefully into the common suction port if it feeds in after the accumulator. This manual is designed to fi ll a need which exists for a concise, elementary text to aidRefrigerant R-1234ze is classified as an A2L refrigerant and must be handled in accordance with all governing regulations. But because of this rapid growth, countless people who must use and work with refrigeration equipment do not fully understand the basic fundamentals of refrigeration system operation.
into our everyday existence it is diffi cult to imagine life without it. Charging liquid refrigerant into a system must be done very carefully because.
0 kommentar(er)
